Back to Course

Drawing Basics – The Complete Online Course

0% Complete
0/0 Steps
  1. Module 1 – Introduction

    1.1 – Drawing Basics – Introduction
  2. 1.2 – Drawing Materials
  3. 1.3 – Getting Started
  4. Module 2 – Lines
    2.1 – Introduction to Line
  5. 2.2 – On Drawing Straight Lines
  6. 2.3 – On Gauging Angles
  7. 2.4 – On Drawing Curved Lines
  8. 2.5 – Straight Lines Exercise
  9. 2.6 – Gauging Angles Exercise
  10. 2.7 – Curved Lines Exercise
  11. Module 3 – Shapes
    3.1 – Introduction to Triangles
  12. 3.2 – On Drawing Triangles
  13. 3.3 – Drawing Triangles: Row 1, Number 1
  14. 3.4 – Triangles: Row 1 Remainder
  15. 3.5 – Triangles: Rows 2, 3 & 4
  16. 3.6 – Introduction to Irregular Polygons
  17. 3.7 – Drawing Polygons
  18. 3.8 – Drawing Polygons, Part 2
  19. 3.9 – Introduction to Curved Shapes
  20. 3.10 – Drawing Curved Shapes
  21. Module 4 – Values
    4.1 – Introduction to Value
  22. 4.2 – Value Compression
  23. 4.3 – Quantifying Value
  24. 4.4 – Value and Drawing Materials
  25. 4.5 – On the Value Scale
  26. 4.6 – Drawing a Value Scale
  27. 4.7 – Contrasts
  28. Module 5 – Progressions
    5.1 – Value Progressions
  29. 5.2 – Progression 1
  30. 5.3 – Progression 2
  31. 5.4 – Progression 3
  32. 5.5 – Progression 4
  33. 5.6 – Progression 5
  34. 5.7 – Progression 6
  35. Module 6 – Cube
    6.1 – The Logic of the Light
  36. 6.2 – On Linear Perspective
  37. 6.3 – Structuring the Cube
  38. 6.4 – Introduction to the "Value Study"
  39. 6.5 – Cube: Value Study
  40. 6.6 – Modeling the Cube
  41. Module 7 – Cylinder
    7.1 – Introduction to the Cylinder
  42. 7.2 – Constructing the Cylinder
  43. 7.3 – On "Turning the Form"
  44. 7.4 – Light Side vs. Shadow Side
  45. 7.5 – Cylinder Value Study
  46. 7.6 – Modeling the Cylinder
  47. Module 8 – Sphere
    8.1 – Structure of a Sphere
  48. 8.2 – The Structure of the Light Mass
  49. 8.3 – Structuring the Sphere
  50. 8.4 – Sphere: Value Study
  51. 8.5 – Modeling the Sphere, Part 1
  52. 8.6 – Modeling the Sphere, Part 2
  53. Module 9 – Arrangement of Solids
    9.1 – Arrangement of Solids: The Envelope
  54. 9.2 – Arrangement of Solids: The Block-in
  55. 9.3 – Arrangment of Solids: Lining-in
  56. 9.4 – Arrangement of Solids: Value Study
  57. 9.5 – Arrangement of Solids: Modeling, Part 1
  58. 9.6 – Arrangement of Solids: Modeling, Part 2
  59. 9.7 – Arrangement of Solids: Modeling, Part 3
  60. 9.8 – Arrangement of Solids: Modeling, Part 4
  61. 9.9 – Arrangement of Solids: Modeling, Part 5
  62. 9.10 – Conclusion

In This Lesson:
Remember, the goal with a value study is to keep things simplified. The tendency can be to over-develop the study, spending more time and effort on it that is intended. Use the study to learn what you need to know about the overall value structure of the image, then move on to the main drawing.

Responses

Your email address will not be published. Required fields are marked *